Promote a set of linkage devices to complete the switching tasks of dampers, valves, gates and dampers. Choosing an electric push rod as an actuator can not only reduce the air source equipment and auxiliary equipment required for pneumatic actuators, but also reduce the weight of the actuator. Pneumatic actuators require a certain amount of air pressure throughout the control and operation process. Although low-power amplifiers can be used, the cumulative amount is still large. Choose an electric push rod for organization. When changing the control opening, power is required. When the required opening is reached, the power supply can no longer be provided. Therefore, from the perspective of energy saving, the electric push rod pneumatic actuator has obvious energy-saving advantages.
The electric push rod is an electric drive device that converts the rotary motion of the motor into the linear reciprocating motion of the push rod. It can be used as an actuator in various simple or complex process flows to achieve remote control, centralized control or automatic control. Whether it is an electric push rod or a small electric push rod, or even a micro electric push rod, it has been well developed and used in various industries. Now the photovoltaic industry is developing rapidly, and our electric push rod products are gradually used in photovoltaic power generation systems: electric push rod power generation industry from the initial technology to the present, photovoltaic power generation has been upgraded from expensive photovoltaic cells to cost-effective polycrystalline silicon cells, and its application range has also been greatly expanded. In the process, the use of parts has also changed. In the past, most power generation modes used fixed brackets, but today's power generation modes are mainly based on electric push rod tracking. The reason why electric push rods are used in the photovoltaic power generation industry The reason why electric push rods are used in photovoltaic power generation systems is that the price of solar panels is relatively expensive, which greatly limits the popularity of products. In this case, there is an urgent need to replace new products, so the application of electric push rods has also been further developed.
Electric push rods Due to the high efficiency and stability of electric push rod tracking, the development of the photovoltaic power generation industry has been recognized by all parties, whether it is government departments or the same industry. The power generation model has been unanimously recognized by them, which further prompted people to increase investment in this field, making the electric push rod tracking system usher in an ideal development period. Classification of electric push rod tracking photovoltaic power generation system This power generation method can be simply divided into two categories, namely, axis connection tracking system and dual-axis tracking system, no matter which one it is. Tracking system electric push rods are used as power supply equipment for tracking systems. Because of this, there are strict requirements for its service life. As long as it is consistent with the photovoltaic cell, the efficiency of the photovoltaic power generation system can be maximized.
